Storage Button
The Storage Button provides a thumbnail view and control for a storage slot within MADRIX.
Tapping a button will activate the storage dependant on the defined settings.
| Field | Description |
|---|---|
| Storage | The storage number of the slot in MADRIX (1 to 256) |
| Place | The place number of the slot in MADRIX (1 to 256) |
| Madrix Patch* | The address of the MADRIX instance (setup in Settings > Connectivity > HTTP) |
| Position Mode | The location to activate the storage slot (All, Left or Right) |
| Fade Mode | Whether the content should appear with or without fade |
| Display Thumbnail | Select enabled to show thumbnail in the control |
| Display Slot Name | Select enabled to display the slot name (Example S1P1) |
| MADRIX Version | This can be Version 5 or Version 3. (Default: Version 5) |
*The Patch address should be the root IP address of the instance (Example: http://10.0.0.1)
Action Map
The action map below details the point at which commands are actioned
 |  |  |  | |
|---|---|---|---|---|
| Touch Ready | Touch Begin | Touch Down | Touch Release | Touch End |
| X | X | X | Command sent | X |
Troubleshooting Tip: If Ctrl for iPad cannot communicate with ELM, check the windows firewall settings on the ELM PC to ensure communication is not being blocked.